chamber test chamber

• Requirements for the installation of the water spray test chamber

  Jun 07, 2025

  This device differs from ordinary equipment, so the installation site must meet the following special requirements: The site must have ample space for the test equipment and sufficient maintenance area. The laboratory should be equipped with a water supply system.  The installation site should have ideal drainage facilities, such as ditches and outlets. The power supply for the device should have a good grounding system and a waterproof base and cover to prevent electrical leakage or electric shock due to water splashing onto the power source. The height of the installation site should allow the device to operate normally and facilitate future maintenance and repairs after installation. The annual temperature at the installation site should be maintained between 5-32℃, with a relative humidity not exceeding 85%, and there should be adequate ventilation. The installation should be in a dust-free environment.  The environmental temperature at the installation site should avoid sudden changes. The installation should be on a level surface (using a level to ensure it is level). The installation should be in a location away from direct sunlight.  The installation should be far from flammable materials, explosive materials, and high-temperature heat sources.  It is best not to install other equipment in the laboratory to prevent moisture-induced corrosion. Water source: municipal tap water。   

  THẺ HOT : Phòng thử nghiệm môi trường environmental simulation chamber Environmental Test Equipment Phòng thử nghiệm khí hậu chamber test chamber Water-Cooled Condenser

  ĐỌC THÊM